9.14/Performance Complete Kit
Application Fall arrest, vertical fall arrest system attachment, work positioning
Attachment Dorsal position (for fall arrest), frontal belay loops (for partial fall arrest), on waist belt (for work positioning)
Kit Contents
a. Performance Harness 4-Point)
b. Lanyard SC2 (carabiner connector)
c. Work Positioning Lanyard (webbing type)
d. Open Round Slings 60cm and 120cm
e. Gear Bag 50
Options Order an additional Harness PPE Pack (short brim helmet with chin strap, work gloves), not supplied as standard
Applicable standards
SANS 50361:2003 Full body harnesses
SANS 50355:2003 Energy absorbers
SANS 50354:2003 Lanyards
Conforms to
SANS 50358:2008 Work positioning
SANS 50362:2008 Connectors
SANS 50566:1997 Slings
9.15/Technical Complete Kit
Application Fall arrest, work positioning, vertical fall arrest attachment, rope access (and rescue)
Attachment Dorsal position (for fall arrest), frontal chest (for partial fall arrest), frontal waist (for rope access and rescue), on waist belt (for work positioning)
Kit Contents
a. Technical Harness (5-Point)
b. Lanyard SC2 (carabiner connector)
c. Work Positioning Lanyard (webbing type)
d. Open Round Slings 60cm and 120cm
e. Gear Bag 50
Options Order an additional Harness PPE Pack (short brim helmet with chin strap, work gloves), not supplied as standard
Applicable standards
SANS 50361:2003 Full body harnesses SANS 50355:2003 Energy absorbers SANS 50354:2003 Lanyards
Conforms to SANS 50358:2008 Work positioning
SANS 50362:2008 Connectors
SANS 50566:1997 Slings
9.16/Roofers Kit
Application Fall arrest (work at height from ladder or roof)
System Portable vertical access system with a mobile fall arrestor connecting to harness, an anchored static rope feeds through the fall arrestor which locks in the event of a fall
Kit Contents
a. Anchors slings 150cm (2)
b. Kernmantel static rope 11mm (30m)
c. Mobile fall arrestor (rope grab)
d. Oval carabiners (2)
e. Rope edge protectors
f. Gear bag 50
Training required Unit standard ID:229998 Explain and perform fall arrest techniques when working at heights
Be aware Requires a harness with frontal attachment point
Applicable standards
Conforms to SANS 50362:2008 Connectors
SANS 50795:1996 Anchor devices SANS 50353-2:2003 Guided type fall arrestors
SANS 51891:1998 Low stretch Kernmantel ropes
SANS 50363:2003 Fall arrest systems
9.17/Roofers Kit (walkway)
Application Fall arrest (work at height from roof)
System Portable vertical or horizontal access system to secure a ladder for safe roof work
Kit Contents
a. Anchor sling 200cm (4)
b. Daisy chain 200cm (8)
c. Oval maillon 10mm
d. Crown protectors (2)
e. Carabiners (12)
e. Professional Gear Bag 50
Options Order an additional Harness PPE Pack (short brim helmet with chin strap, work gloves), not supplied as standard
Applicable standards
Conforms to
SANS 50795:1996 Anchor devices SANS 50362:2008 Connectors Construction Regulation 10 (5) (e)
9.01 Basic Rescue Kit (Pick off type)
Application Fall arrest rescue
Attachment Vertical ascending and descending system, rescuer descends to the fall victim, rescuer lowers both to safety below
Kit Contents
a. Anchor Sling 150cm b. Static rope 11mm (up to 150mm rope length)
c. Double locking descent device (Lory) d. Jumar with leg strap
e. Rescue knife
f. Quick draw
g. Twist-lock carabiner connectors (5)
h. Gear bag 50
Training required Unit standard ID: 229995 Install, use and perform basic rescues from fall arrest systems
Easy installation System can be installed and used by a single person performing the rescue
Applicable standards
Conforms to SANS 50362:2008 Connectors
SANS 50795:1996 Anchor devices
EN 341:2011 Descent devices for rescue
SANS 50353-2:2003 Guided type fall arrestors
SANS 51891:1991 Low stretch Kernmantel ropes
9.02 Remote Retrieval Rescue Kit
Application Remote fall arrest rescue
System Portable vertical ascending and descending system, with setup options for 3:1…4:1 ….or 5:1 pulley system
Contents
a. Anchor sling 150cm (2)
b. Static rope 11mm (up to 600m length)
c. Extension pole
d. Kong Frog and connector
e. Rigging plate (medium)
f. Lory
g. Single pulleys (3)
h. Jumar handle (2)
i. Tape ladder
j. Twist-lock carabiner connectors (8)
k. Gear bag 100
Training required Unit standard ID: 229995 Install, use and perform basic rescues from fall arrest systems
Applicable standards
Conforms to
SANS 50362:2008 Connectors
SANS 50795:1996 Anchor devices
EN 341:2011 Descent devices for rescue
SANS 50353-2:2003 Guided type fall arrestors
SANS 51891:1991 Low stretch Kernmantel ropes